P4300 Series Polyethylene Foam Tapes
Crossed-linked, closed cell, polyethylene foam, coated on both sides with a high tack permanent acrylic pressure sensitive adhesive. It has high adhesion properties and holding power, with good grip to a wide range of surfaces. The acrylic adhesive has excellent environmental resistance and aging properties.
Products Details
- Technical Specs
- Product Highlights
- Applications
- Available Options
Standard Roll Size | Serial Number | Thickness | Length |
---|---|---|---|
P4303 | 1/32” | 216’ | |
P4306 | 1/16” | 108’ | |
P4312 | 1/8” | 54’ |
Performance | Test | Typical Performance | Test Method |
---|---|---|---|
Adhesion to Steel @ 72° F, immediate | 3.5 lbs/inch width | PSTC-1 | |
Adhesion to Steel @ 72° F, after 24 hrs | 7 lbs/inch or foam tear | PSTC-1 | |
Static Shear @ 72°F 1 x 1 x 500 grams | Indefinte | PSTC-7 | |
Static Shear @ 72°F 1 x 1 x 1000 grams | 500 hours minimum | PSTC-7 | |
Water and Humidity Resistance | Excellent | PSTC-1 | |
Application Temperature | 50° F to 80° F | PSTC-1 | |
Service Temperature | -20° F to 200° F | PSTC-1 | |
Shelf Life | 2-3 years when stored at room temperature |
Physical Properties | Property | Test Method | 4 Pound 1/16" | 6 Pound 1/32" |
---|---|---|---|---|
Density | ASTM D3575 | 3.6 -4.4 | 5.4 - 6.6 | |
Compression Strength (psi 25%) | ASTM D3575 | 10 - 13 | 16 - 35 | |
Tensile Strength (psi) | ASTM D3575 | 70 - 78 | 127 - 130 | |
Elongation at Break (%) | ASTM D3575 | 180 - 182 | 200 - 220 | |
Tear Resistance (psi) | ASTM D3575 | 15 - 18 | 25 - 35 | |
Compression Set (% of original thickness) | ASTM D3575 | 16 - 18 | 10 - 12 |
Double sided PE Foam Tape
- High initial and ultimate adhesion properties
- Superior flexibility and resiliency
- Excellent chemical resistance
- Acrylic adhesive has excellent environmental resistance and aging properties
- Point-of-Purchase Displays
- Nameplates
- Extrusions
- Reflectors
- Low Surface Energy Plastics
- Wire Clips
- Signage
Application Notes
Thoroughly clean contact surface before use. Once P4300 has been applied, it cannot be removed and reused. Therefore, position P4300 carefully, assuring that it is in contact with all surfaces. If P4300 is misaligned, remove used unit, discard and repeat application with new unit. Test product for system compatibility as individual application conditions can impact results.
- Release Liner: White Paper
LEGAL DISCLAIMER
IN NO EVENT WILL PRES-ON OR ANY OF ITS AFFILIATES BE LIABLE FOR ANY DIRECT OR INDIRECT DAMAGES, CLAIMS, OR LOSSES WHATSOEVER (INCLUDING, BUT NOT LIMITED TO, INCIDENTAL DAMAGES, CONSEQUENTIAL DAMAGES, LOST PROFITS AND/OR LOST OPPORTUNITIES) RESULTING FROM OR RELATED TO THIS PRODUCT OR THE USE, MISUSE, PURCHASE, OR SALE OF THIS PRODUCT, WHETHER BASED ON WARRANTY, CONTRACT, TORT, OR ANY OTHER LEGAL THEORY, WHETHER OR NOT FORESEEABLE, AND WHETHER OR NOT ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Any specifications, instructions, or other information provided by Pres-On in connection with this product are provided for informational purposes only and shall not be deemed to impose any representations, warranties, covenants or other obligations upon Pres-On or any of its affiliates.