Pres-On PB3 Adhesive Backed Square Polyurethane Molded Bumpers provide a large area of surface contact for protection against vibration, slipping and sliding, damage, scratching, and marking. Made of 100% polyurethane coated with an aggressive rubber adhesive, Pres-On’s bumpers do not contain plasticizers, oils or fillers, and will not mar, scratch, or stain surfaces. Plus, they’re easy to apply. Simply peel away the disposable backer paper and place the bumper where protection is needed.
- Technical Specs
|Static Shear Test||300+ hours* [PSTC**-07 Procedure A / ASTM*** B 3654]|
|Quick Tack-Stainless Steel||144 oz/in2 (633 g/cm2)|
|Peel Adhesion||160 oz/in (1785 g/cm) [PSTC-3** / ASTM*** D 3330]|
|Substrate||Thickness: 2 mils (50 microns)
Basis Weight: 10,000 in2/lb (142,230 cm2/kg) typical value
Tensile Strength: 28,000psi MD (1,900,000 g/cm2)
|Liner||Thickness: 6.2 mils (158 microns)
Basis Weight: 92.0 lb (151 g/m2)
|Temperature||Application: 65°F — 150°F (18°C — 65.6°C)
End Use: 0°F — 180°F (-18°C — 82.2°C)
|Substrate Elongation||120% MD|
|Shelf Life||24 months based on accelerated aging|
|Storage||73.4°F (23°C) and 55% relative humidity|
*Maximum adhesion achieved after 24 hours | **Pressure Sensitive Tape Council | ***American Society for Testing and Materials
Pres-On Bumpers are ideal for countless everyday applications.
- Picture Frames
- POP Displays
- DIY Projects
- Office Furniture
To obtain a maximum bond, surfaces need to be smooth, non-porous, clean, dry and free of all debris, oils and solvents. Clean the surface with a low strength solvent such as isopropyl alcohol (rubbing alcohol) or heptane. Follow solvent manufacturer’s precautionary warnings and suggested handling procedures when using solvents. Bend pad slightly grasping bumper on sides without touching the adhesive. Apply to surface with enough pressure to ensure a complete bond. Allow a dwell time of 24 hours before exposing to heavy force or weight. The composition of this product contains no migratory plasticizers of any kind, which would mar surfaces of contact. Users should evaluate the suitability of our Bumpers for a specific application under actual conditions.
IN NO EVENT WILL PRES-ON OR ANY OF ITS AFFILIATES BE LIABLE FOR ANY DIRECT OR INDIRECT DAMAGES, CLAIMS, OR LOSSES WHATSOEVER (INCLUDING, BUT NOT LIMITED TO, INCIDENTAL DAMAGES, CONSEQUENTIAL DAMAGES, LOST PROFITS AND/OR LOST OPPORTUNITIES) RESULTING FROM OR RELATED TO THIS PRODUCT OR THE USE, MISUSE, PURCHASE, OR SALE OF THIS PRODUCT, WHETHER BASED ON WARRANTY, CONTRACT, TORT, OR ANY OTHER LEGAL THEORY, WHETHER OR NOT FORESEEABLE, AND WHETHER OR NOT ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Any specifications, instructions, or other information provided by Pres-On in connection with this product are provided for informational purposes only and shall not be deemed to impose any representations, warranties, covenants or other obligations upon Pres-On or any of its affiliates.