PBTP20 Self Wound Bag Enclosure Tapes are single side coated with permanent hot melt acrylic adhesive. This clear polypropylene tape can be easily cut with a hot knife.
- Technical Specs
- Product Highlights
|Standard Roll Sizes||Serial Number||Adhesive Width||Roll Length|
|PBTP20||3/4" (19mil)||6000 feet|
|PBTP20||1" (25 mil)||6000 feet|
|Thickness||1.2 mil (30 microns)|
|Adhesive||Acrylic Based Hot Melt Adhesive|
|Adhesive Thickness||0.8 mil (20 microns)|
- Half the price of traditional plastic zippers
- Economical way to make reclosable bags
- Coated on one side with hot melt acrylic adhesive
- No liner required
- No special equipment required to make bags
- Easily cut with a hot knife
- Corona treatment improves adhesion
- Low slip or no slip films are recommended
PBTP20 is an extremely economical alternative to traditional plastic zippers in the manufacture of resealable adhesive closure bags.
- Resealable bags
Ensure bonding surfaces are well unified, clean, dry and free of dirt and oils. Apply firm and even pressure to improve adhesive-to-surface contact. Allow proper temperature and time to enhance bond strength as adhesive flows onto the surface.
IN NO EVENT WILL PRES-ON OR ANY OF ITS AFFILIATES BE LIABLE FOR ANY DIRECT OR INDIRECT DAMAGES, CLAIMS, OR LOSSES WHATSOEVER (INCLUDING, BUT NOT LIMITED TO, INCIDENTAL DAMAGES, CONSEQUENTIAL DAMAGES, LOST PROFITS AND/OR LOST OPPORTUNITIES) RESULTING FROM OR RELATED TO THIS PRODUCT OR THE USE, MISUSE, PURCHASE, OR SALE OF THIS PRODUCT, WHETHER BASED ON WARRANTY, CONTRACT, TORT, OR ANY OTHER LEGAL THEORY, WHETHER OR NOT FORESEEABLE, AND WHETHER OR NOT ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Any specifications, instructions, or other information provided by Pres-On in connection with this product are provided for informational purposes only and shall not be deemed to impose any representations, warranties, covenants or other obligations upon Pres-On or any of its affiliates.