Pres-On P10400 Series Cork Tapes are made of granulated cork. These tapes carry a high-performance acrylic adhesive that is designed to meet the most critical high bond applications. Exhibits excellent environmental resistance and aging properties.


Products Details

  • Technical Specs
  • Product Highlights
  • Applications
  • Available Options

Standard Roll SizeSerial NumberThicknessLength
All rolls have standard width
of 52 inches, custom widths
Adhesion PropertiesTestTypical PerformanceTest Method
Adhesion to Steel @ 72°F
- Steel immediate3.5 lbs/in width or foam tearPSTC-1
- Steel after 24 hrs7.0 lbs/in width or foam tearPSTC-1
- Polystyrene immediate5.0 lbs/in width or foam tearPSTC-1
- Polystyrene after 24 hrs7.0 lbs/in width or foam tearPSTC-1
- Powder paint immediate3.5 lbs/in width or foam tearPSTC-1
- Powder paint after 24 hrs7.0 lbs/in width or foam tearPSTC-11
Shear @ 72°F, 1” x 1”, 500 gmsIndefinitePSTC-7
Shear @ 72°F, 1” x 1”, 1000 gms200 hours minimumPSTC-7
UV ResistanceExcellentPres-On PTM-4
Optimal Application Temperature45°F to 80°FPres-On PTM-1
Service Temperature-20°F to 200°FPres-On PTM-2
Water and Humidity ResistanceExcellentPres-On PTM-3
Shelf Life1 year stored at room temperature
Physical PropertiesPropertyTest MethodUnit of MeasureResult
Binder is Polymeric
Granule: 10/20
DensityASTM D-1564lb10
Tensile StrengthASTM D-3574-81psi35
Compression @ 100 PSIASTM D-1056-68%20-35%
Recovery (after 100 PSI)ASTM%75% min.
Flexibility (F=5)ASTM--no cracks
Temp.F-20 to 175 F

  • Rugged granulated cork with polymeric binder
  • Very high adhesion properties and holding power
  • Attractive cushion / bumper for cabinet doors, furniture, and store fixtures
  • Adheres securely to wood, plastic and painted surfaces
  • Excellent as spacer pads and gaskets
  • Extremely compressible, resistant to wear and tear

Pres-On P10400 Series Cork Tapes provide padding and cushioning for store fixtures, furniture and consumer appliances; eliminate squeaks between metal panels; and act as bumper pads for cabinet doors. Also effective as weather stripping for wood and metal sash.

  • Cabinet doors & drawers
  • Furniture
  • Point-of-Purchase Displays
  • Appliances
  • Shipping Protection
  • Storage Protection
  • Weather Stripping

Application Notes

Thoroughly clean contact surface before use. Once tape has been applied, it cannot be removed and reused. Therefore, position tape carefully, assuring that it is in contact with all surfaces. If tape is misaligned, remove used unit, discard and repeat application with new unit. Test product for system compatibility as individual application conditions can impact results. Pres-On does not assume any responsibility or liability for any advice furnished by it, or for the performance or results of any installation or use of the product(s) or any final product into which the product(s) may be incorporated by the purchaser and/or user. The purchaser and/or user should perform its own tests to determine the suitability and fitness of the product(s) for the particular purpose desired in any given situation.

  • Release Liner: Brown Kraft Paper
  • Custom die-cut shapes