GP Shur-Step® Non-Skid Abrasive Tape
Low profile, high-strength and water resistant, Pres-On General Purpose Shur-Step® Non-Skid Abrasive Tape features a rubber-based adhesive that adheres to any smooth, clean, and dry surface. Finely ground abrasive particulates (80 grit) ensure sturdy footing, indoors or out.
Products Details
- Technical Specs
- Product Highlights
- Applications
- Available Options
| Standard Roll Sizes | Serial Number | Thickness | Width | Length |
|---|---|---|---|---|
| General Purpose GP (80 grit) | ||||
| 0.025 | 3/4 inch | 60 feet | ||
| 0.025 | 1 inch | 60 feet | ||
| 0.025 | 2 inch | 60 feet | ||
| 0.025 | 4 inch | 60 feet | ||
| 0.025 | 8 inch | 60 feet | ||
| 0.025 | 12 inch | 60 feet | ||
| 0.025 | 24 inch | 60 feet | ||
| Heavy Duty HD (60 grit) | ||||
| 0.032 | 3/4 inch | 60 feet | ||
| 0.032 | 1 inch | 60 feet | ||
| 0.032 | 2 inch | 60 feet | ||
| 0.032 | 4 inch | 60 feet | ||
| 0.032 | 8 inch | 60 feet | ||
| 0.032 | 12 inch | 60 feet | ||
| 0.032 | 24 inch | 60 feet | ||
| Cleats | ||||
| 0.025 | 3/4 inch | 24 inch | ||
| 0.025 | 6 inch | 24 inch | ||
| 0.025 | 3/4 inch | 24 inch | ||
| 0.025 | 6 inch | 24 inch |
| Physical Properties | Property | |
|---|---|---|
| Backing | 3 mil Polyethylele | |
| Prime Coat | Resin Binder | |
| Abrasive | Silicone Carbide | |
| Top Coat | Resin Binder | |
| Adhesive | Hot Melt Rubber | |
| Color | Black | |
| Liner | 54 lbs Brown Kraft | |
| 3.2 mil thick, 2-Side | ||
| Thickness (General Purpose) | 0.025 | |
| Thickness (Heavy Duty) | 0.032 |
- Anti-Slip material stabilizes dangerous, slippery areas
- Versatile for application on lawn tractors, vehicles, stairs, food service, indoor/outdoor areas, and more
- Adhesive system bonds to powder-coated paint and raw concrete
- Available in standard size rolls and cleats
- Can be ordered in non-standard die-cut shapes and non-standard rolls
Pres-On General Purpose Shur-Step® Non-Skid Abrasive Tape provides maximum skid resistance on a wide variety of floor types and surfaces, including the powder coated paint finishes found on lawnmowers, truck beds, snowmobiles, and other commercial products. These tapes are the ideal safety solution in factories or warehouses when applied to steps, ramps, loading docks, ladders, around machinery, or any place slippery conditions exist.
- Stair Treads
- Non-Skid / Non-Slip
- Building Materials
- Consumer Products
- Non-Skid Flooring
- Ladder Rungs
Application Notes
Thoroughly clean contact surface before use. Once tape has been applied, it cannot be removed and reused. Therefore, position tape carefully, assuring that it is in contact with all surfaces. If tape is misaligned, remove used unit, discard and repeat application with new unit. Test product for system compatibility as individual application conditions can impact results.
- Release Liner: 54# Brown Kraft Paper
- Custom die-cut shapes / cleats
LEGAL DISCLAIMER
IN NO EVENT WILL PRES-ON OR ANY OF ITS AFFILIATES BE LIABLE FOR ANY DIRECT OR INDIRECT DAMAGES, CLAIMS, OR LOSSES WHATSOEVER (INCLUDING, BUT NOT LIMITED TO, INCIDENTAL DAMAGES, CONSEQUENTIAL DAMAGES, LOST PROFITS AND/OR LOST OPPORTUNITIES) RESULTING FROM OR RELATED TO THIS PRODUCT OR THE USE, MISUSE, PURCHASE, OR SALE OF THIS PRODUCT, WHETHER BASED ON WARRANTY, CONTRACT, TORT, OR ANY OTHER LEGAL THEORY, WHETHER OR NOT FORESEEABLE, AND WHETHER OR NOT ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Any specifications, instructions, or other information provided by Pres-On in connection with this product are provided for informational purposes only and shall not be deemed to impose any representations, warranties, covenants or other obligations upon Pres-On or any of its affiliates.