Additional information
| Material Category | |
|---|---|
| Material | |
| Cell Structure | |
| Stock or Special Order | |
| Type of Tape | |
| Adhesive | |
| Thickness | |
| Produced as | |
| Roll Widths | |
| Softness | |
| Color | |
| Texture | |
| Durability | |
| Material Price | |
| Foam High Temperature Rating | |
| Foam Low Temperature Rating | |
| Adhesive Temperature Range | |
| Compression Deflection | |
| Durometer Shore | |
| Density | |
| Tensile Strength | |
| Compression Set | |
| Elongation | |
| Tear Strength | |
| Application | |
| Industry | |
| Reach / RoHS | |
| Made in: | |
| Test Methods: | |
| Disclaimer a: | Technical data presented above is the foam/material prior to the adheisve. |
| Disclaimer b: | End user is responsible for determining the suitability of the product to application. |
| Terms and Conditions |
Technical data
High-density black polyurethane traction foam: a protective, cushioned, non-marring barrier with a high coefficient of friction that keeps its integrity even under extreme compression.
- High coefficient of friction; smooth, non-marring surface
- Resists abrasion; withstands heavy loads
- Flexible, conforms to irregular surfaces; easily die-cut
- Available with a single-side acrylic adhesive coating
Markets: Bumpers and footpads for business machines, industrial equipment, appliances, housewares and electronics
| Thickness | .062" standard (also .016", .030", .094", .125"; minimums apply) | |
|---|---|---|
| Hardness | 65 Shore O | ASTM D2240 |
| Density | 40 lb/ft³ (640 kg/m³) | ASTM D3574 |
| Tensile strength | 445 psi (3070 kPa) | ASTM D3574 |
| Coefficient of friction, kinetic | 1.4 | ASTM D4518 |
| Peel adhesion | 65 oz/in (7.2 N/cm); 180° peel 80 oz/in (8.8 N/cm) | PSTC-3 |
| Temperature resistance | Constant use max 158°F (70°C); intermittent max 250°F (121°C) |
| Log roll width | 54" | |
|---|---|---|
| Roll length | 100′ | |
| Die cuts | Custom shapes available |
Source: UR1700 data sheet (PDF). Values are typical unless stated. Color and finish may vary by lot; tolerances vary with thickness and width. Confirm suitability for your application with Pres-On.
