P10800 Series Cork / Rubber Tapes
Pres-On P10800 Series Cork / Rubber Tapes are made of sponged synthetic cork and copolymer rubber. These tapes carries a high-performance acrylic adhesive that demonstrates excellent grab to virtually any surface. Exhibits excellent environmental resistance and aging properties.
Products Details
- Technical Specs
- Product Highlights
- Applications
- Available Options
| Standard Roll Size | Serial Number | Thickness | Length |
|---|---|---|---|
| All rolls have standard width of 52 inches, custom widths available | P10803 | 1/32” | 100’ |
| P10806 | 1/16” | 100’ | |
| P10812 | 1/8” | 50’ |
| Adhesion Properties | Test | Typical Performance | Test Method |
|---|---|---|---|
| Adhesion to Steel @ 72°F | |||
| - Steel immediate | 3.5 lbs/in width or foam tear | PSTC-1 | |
| - Steel after 24 hrs | 7.0 lbs/in width or foam tear | PSTC-1 | |
| - Polystyrene immediate | 5.0 lbs/in width or foam tear | PSTC-1 | |
| - Polystyrene after 24 hrs | 7.0 lbs/in width or foam tear | PSTC-1 | |
| - Powder paint immediate | 3.5 lbs/in width or foam tear | PSTC-1 | |
| - Powder paint after 24 hrs | 7.0 lbs/in width or foam tear | PSTC-11 | |
| Shear @ 72°F, 1” x 1”, 500 gms | Indefinite | PSTC-7 | |
| Shear @ 72°F, 1” x 1”, 1000 gms | 200 hours minimum | PSTC-7 | |
| UV Resistance | Excellent | Pres-On PTM-4 | |
| Optimal Application Temperature | 45°F to 80°F | Pres-On PTM-1 | |
| Service Temperature | -20°F to 200°F | Pres-On PTM-2 | |
| Water and Humidity Resistance | Excellent | Pres-On PTM-3 | |
| Shelf Life | 1 year stored at room temperature |
| Performance Testing | Test | Typical Performance | Test Method |
|---|---|---|---|
| Applied on 2 mil Mylar film | Loop tack | 80 oz/in typical | T1, MI LIB1 |
| Adhesion to Steel - 15 minute dwell | 4.3 to 6.4 lbs/in | PSTC-1 | |
| Adhesion to Steel - 24 hour dwell | 6.0 lbs/in minimum | PSTC-1 | |
| Shear 1” x 1”, 500 gms | 1000 hours typical | PSTC-7 | |
| Shear 1” x 1”, 1000 gms | 200 hours minimum | PSTC-7 |
| UV Exposure | Test | Initial Data | After Exposure | Spec |
|---|---|---|---|---|
| Tested in-house after 72 hours in UV chamber | Density, PCF | 38.2 | 40.3 | 37.5 Min |
| Tensile, PSI | 142 | 159 | 125 Min. | |
| @400 PSI - Compression % | 47.2 | 41.5 | 30-50 | |
| @400 PSI - Recovery % | 82.8 | 84.3 | 80 Min. | |
| @400 PSI - Flex, Factor | 2-3 | 2-3 | 3 Max. |
| Physical Properties | Property | Test Method | Unit of Measure | Result |
|---|---|---|---|---|
| Rubber is Copolymer | Density | ASTM D-1564 | lb/ft2 | 33 |
| Tensile Strength | ASTM D-3574-81 | psi | 125 | |
| Hardness | ASTM D2240 | Shore A | 60 ± 10 | |
| Compression @ 400 PSI | ASTM D-1056-68 | % | 40-55 |
- Rugged synthetic cork and copolymer rubber combination
- Very high adhesion properities and holding power
- Attractive cushion / bumper for cabinet doors, furniture, and store fixtures
- Adheres securely to wood, plastic and painted surfaces
- Excellent as weather stripping for wood and metal sash
- Excellent as a rugged, long-lasting flooring material
Pres-On P10800 Series Cork / Rubber Tapes provide padding and cushioning for store fixtures, furniture and consumer appliances; eliminate squeaks between metal panels; and act as bumper pads for cabinet doors. Also effective asweather stripping for wood and metal sash. Can be used as a flooring material.
- Cabinet doors & drawers
- Furniture
- Point-of-Purchase Displays
- Appliances
- Shipping Protection
- Storage Protection
- Weather Stripping
- Non-Skid Flooring
Application Notes
Thoroughly clean contact surface before use. Once tape has been applied, it cannot be removed and reused. Therefore, position tape carefully, assuring that it is in contact with all surfaces. If tape is misaligned, remove used unit, discard and repeat application with new unit. Test product for system compatibility as individual application conditions can impact results. Pres-On does not assume any responsibility or liability for any advice furnished by it, or for the performance or results of any installation or use of the product(s) or any final product into which the product(s) may be incorporated by the purchaser and/or user. The purchaser and/or user should perform its own tests to determine the suitability and fitness of the product(s) for the particular purpose desired in any given situation.
- Release Liner: Brown Kraft Paper
- Custom die-cut shapes
LEGAL DISCLAIMER
IN NO EVENT WILL PRES-ON OR ANY OF ITS AFFILIATES BE LIABLE FOR ANY DIRECT OR INDIRECT DAMAGES, CLAIMS, OR LOSSES WHATSOEVER (INCLUDING, BUT NOT LIMITED TO, INCIDENTAL DAMAGES, CONSEQUENTIAL DAMAGES, LOST PROFITS AND/OR LOST OPPORTUNITIES) RESULTING FROM OR RELATED TO THIS PRODUCT OR THE USE, MISUSE, PURCHASE, OR SALE OF THIS PRODUCT, WHETHER BASED ON WARRANTY, CONTRACT, TORT, OR ANY OTHER LEGAL THEORY, WHETHER OR NOT FORESEEABLE, AND WHETHER OR NOT ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Any specifications, instructions, or other information provided by Pres-On in connection with this product are provided for informational purposes only and shall not be deemed to impose any representations, warranties, covenants or other obligations upon Pres-On or any of its affiliates.