Additional information
| Type of Seal | |
|---|---|
| Cap Size | Custom Size, 18mm, 20mm, 24mm, 28mm, 33mm, 38mm, 43mm, 45mm, 48mm, 50mm, 53mm, 58mm, 59mm, 63mm, 70mm, 83mm, 89mm, 100mm, 110mm, 120mm |
| Bottle Material | |
| Liner Thickness | |
| Product in Bottle | |
| Cap Liner Print | Plain (no print), Red – "Sealed for your protection", Custom Logo Print (high MOQ) |
| Cap Liner Insertion | |
| Cap Liner Removal | |
| Specific Liner Manufacturer |
Technical data
Automated insertion of cap liners into closures, standard and specialty sizes from 20 mm to 120 mm, with glued insertion available for foam liners and two-piece seals.
- Standard and specialty sizes, 20 mm to 120 mm
- Automated equipment removes and inserts liners into caps
- Custom print on backing for large volumes
| One-piece heat induction foil seals | Foil inner seal, foam or paper backed; clean peel or tamper evident; air-tight; vented options. Liquids and solids, plastic bottles and caps, most treated glass. Requires a heat induction machine | |
|---|---|---|
| Pressure seals | Pressure-activated adhesive back printed "Sealed for Your Protection" in red or black; .020" thick. Dry goods, torque-activated, no equipment needed; plastic or glass bottles, plastic or metal caps | |
| Foam cap liners | White three-layer polyethylene foam, compressible seal; .020", .030", .040" and .050"; glued insertion available. All-purpose liner, reusable if retained in the cap | |
| Two-piece heat induction foil seals | Board or foam backed; after induction the backing separates to leave a reusable liner in the cap; glued insertion available. Requires a heat induction machine |
Source: Cap Liner Insertion data sheet (PDF). Values are typical unless stated. Color and finish may vary by lot; tolerances vary with thickness and width. Confirm suitability for your application with Pres-On.
