FDA

Standby

Thickness info Thickness Thickness is height of the foam, measured from the adhesive side up. +

.026″ 1
.028″ 1
2.5mm 1
5mm 1
1/32″ 14
1/16″ 41
3/32″ 3
1/8″ 53
3/16″ 36
1/4″ 47
5/16″ 5
3/8″ 32
1/2″ 22
5/8″ 3
3/4″ 10
1″ 9
1.25″ 1
1.5″ 2
.05″ 5
2.0 mil 1
various 1

Material info Material Material of the gasket. Different materials work better for different applications. Examples, EPDM is excellent for UV (sunlight) exposure, Silicone performs great for high temperature applications, Neoprene has great durability and rebound for enclosure door seals….etc +

Abrasive 2
Blended EPDM/Neoprene 5
Chipboard 1
Cork 1
Cork / Foam 2
Cork / Rubber 1
Cross Linked PE (XLPE) 3
Crushed EPDM 1
Custom 3
Decorative Felt (PET) 1
EPDM 3
Ester 2
Ether 1
EVA 2
Felt (Polyester) 1
Felt (Wool 50% Min.) 1
Fluoroelastomer 1
Foam 1
Foam / Cork / Foam 1
Foam Board 1
High Bond 2
Hook and Loop 2
Natural Cork 1
Neoprene 3
Neoprene / EPDM / SBR Blend 5
Neoprene Vinyl 1
Nitrile 0
Paper board 5
Polyester 2
Polyester Face Stock 1
Polyether 1
Polyethylene 3
Polyurethane 12
Polyurethane Polyether 0
PVC 15
PVC Matting 1
PVF Foam with Aluminum Foil 1
Rubber / Synthetic Rubber 1
Rubber Cork Mastic (Gum) 1
S.B.S. 1
Silicone 2
Silicone Foam with Aluminized Fabric 1
Sponge Rubber 1
Thermoplastic Rubber Matting 1
Urethane 12
Vinyl Matting 1
Viton® 1

Adhesive info Adhesive Rubber adhesive is a permanent pressure sensitive adhesive that has a very high initial tack for slick surfaces and applications that need a quick bond. Acrylic adhesive is a permanent pressure sensitive adhesive that offer a long lasting bond, best suited for outdoor, higher temperature, and water-tight applications. +

Acrylic (special order) 0
Acrylic with cloth scrim backing (special order) 0
Acrylic with Mylar Film 0
Low Tack 1
Mastic 1
Medium Tack 1
Removable 2
Static Cling 4
Acrylic 54
Rubber 11
Silicone 1
Ultra Removable Acrylic PSA 1

Type of Tape info Type of Tape Plain – No adhesive. Single Sided Tape – adhesive on one side. Double Sided Tape – adhesive on both sides. +

Mastic 1
Single Sided 62
Reverse Wound 4
Double Sided 17
Plain, no adhesive 58

Cell Structure info Cell Structure Closed Cell: Common for air and water tight gasket seal applications.Open Cell: Allows air water to filter through material. Common for light weight foam applications that need cushioning but not sealing attributes. +

_ 0
Closed Cell 38
gcan 0
Open Cell 12
Open Cell (closed when compressed) 2

Soft or Firm info Soft or Firm Foams materials range from Ultra Soft to Firm. Softer foams require less pressure to compress and may be more conformable. Firmer foams may offer be better durability. This is a general description, please use the additional engineering filters below if looking for specific compression deflection or shore ratings. +

Ultra Soft 0
Extra Soft 3
Soft 21
Soft / Medium 1
Medium 15
Firm 13
Extra Firm 3

Color info Color Most foam tape materials are available in black or a shade of gray. Some materials have color options such as white, grays, and red. Some felts and specialty materials can be ordered in special decorative colors. +

Black 42
White 17
Gray 12
Charcoal Gray 2
Red 2
Brown 2
Green 0
Tan 4
Tan & Black 1
Custom (large volume) 3
Color (special order) 1

UL Rating info UL Rating UL Rating products have been tested and inspected to meet the specific test standards developed by UL. There are various UL standards such as “UL 50” – Enclosures for Electrical Equipment, “UL 94” – Tests for Flammability of Plastic Materials for Parts, “UL 508” – Industrial Control Equipment, “UL 507” – Gasket and Seals, and more. Use this filter if you are looking for product that meets a specific UL rating. +

UL 723 1
UL48 0
Yes 18
UL 94 5VA 1
UL 94 HF-1 12
UL 94 HBF 2
UL 94 V-0 3
 UL 94 V-0 1
UL 508 10
UL 50E 9
UL 50 5
UL 157 9
UL 48 2
UL JMST2 2
UL Greenguard 1

High Temperature Rating info High Temperature Rating High Temperature (Service) is the high temp rating for continuous use. Many foams may be able to handle higher temperatures at intermediate, or short durations. If your application requires the foam to meet a high temperature please use this filter to sort our products by temperature rating. +

158 F 1
160 F 1
172 F 12
176 F 2
179 F 3
180 F 1
180 F 90 days no deterioration or slump from horizontal panel 0
200 F 9
215 F 3
220 F 4
250 F 14
325 F 3
392 F 3
400 F 1
F 0