Foam Tapes

Pres-On P4200R1 Polyethylene Foam Mounting Tapes are coated with a permanent and tightly cross-linked, pressure sensitive, removable adhesive that does not build during span of use. The product’s low initial grab allows for repositionability and depending on the specific application, removes cleanly from most surfaces for up to one year. P4200R1 holds moderate loads of up to one pound of pressure per square inch of tape.


Products Details

  • Technical Specs
  • Product Highlights
  • Applications
  • Available Options

Standard Roll SizeSerial NumberThicknessLength
All rolls available in widths from 3/16” to 54”P4203R11/32”216’
Removable AdhesiveSpecificationTypical PerformanceTest Method
Rolling Back Tack8 inchesPSTC-6
Adhesion to Steel @ 72°F
- Steel, immediate1.0 lbs/in widthPSTC-1
- Steel after 24 hrs1.2 lbs/in widthPSTC-1
- Glass, immediate1.0 lbs/in widthPSTC-1
- Glass, after 24 hours1.2 lbs/in widthPSTC-1
-Polycarbonate, immediate1.0 lbs/in widthPSTC-1
- Polycarbonate, after 24 hours1.5 lbs/in widthPSTC-1
- Polystyrene, immediate1.0 lbs/in widthPSTC-1
- Polystyrene, after 24 hours1.5 lbs/in widthPSTC-1
- HDPE, immediate0.5 lbs/in widthPSTC-1
- HDPE, after 24 hours0.7 lbs/in widthPSTC-1
StaticShear@72°F1x1x1000g100 hours minimum PSTC-7
Water and Humidity ResistancegoodPres-On
Application Temperature50°F to -80°FPres-On
Service Temperature0°F to -200°FPres-On
Shelf Life1 year stored at room temp

  • Available with permanent / removable, double-sided adhesive coating
  • Provide a strong, long lasting bond on high and low energy surfaces (permanent side)
  • Exhibit high flexibility and conformability
  • Remove easily and cleanly from most surfaces (removable side)
  • Resist staining and discoloration

Recommended for use in packaging and signage applications, as well as mounting point-of-purchase display elements and nameplates. P4200R1 also cushions and protects fragile products from damage during transport.

  • Shipping Protection
  • Point-of-Purchase Displays
  • Signage
  • Nameplates

Application Notes

Ensure bonding surfaces are well unified, clean, dry and free of dirt and oils. Apply firm and even pressure to improve adhesive-to-surface contact. Allow proper temperature and time to enhance bond strength as adhesive flows onto the surface.

  • Release Liner: White Paper
  • Custom die-cut shapes