P8200DC Series Neoprene / EPDM / SBR Foam Tapes are double coated, soft density, closed cell mounting tapes that apply easily and quickly to many surfaces. They create an effective barrier against moisture, gas, dust, and vapors. The permanent acrylic adhesive provides high initial tack and ultimate adhesion, as well as excellent environmental resistance and aging properties.


Products Details

  • Tech Specs
  • Product Highlights
  • Applications
  • Available Options

Standard Roll SizesSerial NumberThicknessLength
All rolls available in widths from 1/8” to 54”P8206DC1/16"100'
P8218DC 3/16”50'
Adhesion PropertiesTestTypical PerformanceTest Method
Adhesion to Steel @ 72°F
- Steel immediate 2.5 lbs/in width or foam tearPSTC-1
- Steel after 24 hours 4.0 lbs/in width or foam tearPSTC-1
Adhesion to Steel, 15 minute dwell 4.3 - 6.4 lbs/inchPSTC-1
Adhesion to Steel, 24 hour dwell 6.0 lbs/inchPSTC-1
Shear 1” x 1”, 500 gms 1000 hoursPSTC-7
Shear 1” x 1”, 1000 gms200 hoursPSTC-7
Optimum Application Temperature 50°F to 80°F Pres-on PTM-1
Functional Temperature 0°F to 225°F Pres-on PTM-2
Water and Humidity ResistanceExcellent Pres-On
Shelf Life1 year
Physical PropertiesPropertyTest MethodUnits of MeasureResults
Density ASTM D-1564lb/ft26
Tensile StrengthASTM D-3574-81psi30 - 50
HardnessASTM D2240 Shore OO2 - 5
Compression Force
25% Deflection
ASTM D-1056-68psi2 - 5
Water Absorption by Weight (max)--%5
Temperature Range--°F-40 to 158
Weather Resistance----Good
Linear Shrinkage (max)
(7 days at 158°F)
Flammability UL94 HF1
FM VSS No. 302

  • Double coated, soft density foam tape with high tensile and shear strength
  • Coated with high-tack, acrylic, pressure sensitive adhesive
  • Excellent flexibility with conformability to uneven surfaces
  • Resist moisture and chemicals
  • Ideal for providing long term fastening / mounting power; can replace screws, liquid adhesives, and spot welds

P8200DC Series Neoprene / EPDM / SBR Foam Tapes are designed for use in constructing point-of-purchase displays, mounting signs, nameplates, and mirrors, as well as bonding ceiling and window mounts, and additional OEM assembly applications.

  • Point-of-Purchase Displays
  • Signage
  • Nameplates
  • Mirrors

 Application Notes

Thoroughly clean contact surface before use. Once tape has been applied, it cannot be removed and reused. Therefore, position tape carefully, assuring that it is in contact with all surfaces. If tape is misaligned, remove used unit, discard and repeat application with new unit. Test product for system compatibility as individual application conditions can impact results.

  • Release Liner: Brown Kraft Paper
  • Custom die-cut shapes