U6000 Series Urethane Foam Tapes
Pres-On U6000 Series Urethane Foam Tapes are high density, open cell, urethane foam tapes with a single side coating of high-tack acrylic adhesive. These foam tapes exhibit excellent cushioning characteristics and apply easily to most clean, dry surfaces – even irregular rough surfaces. U6000 reduces the transmission of vibration, provides thermal insulation, and offers excellent holding strength.
Products Details
- Tech Specs
- Product Highlights
- Applications
- Available Options
| Standard Roll Sizes | Serial Number | Thickness | Length |
|---|---|---|---|
| All rolls available in widths from 3/16” to 54” | U6003 | 1/32” | 200' |
| U6006 | 1/16” | 100' | |
| U6012 | 1/8" | 50' |
| Adhesion Properties | Test | Typical Performance | Measurement Method |
|---|---|---|---|
| Dynamic Tensile Bond | 90 | PSI | |
| Dynamic Shear Adhesion (PSI) (180 peal adhesion stainless steel) | 95 | PSI | |
| Liner Side | 100 | oz/in | |
| Exposed Side | 85 | oz/in | |
| Temperature | -40 F to 200 F | degrees F | |
| Water and Humidity Resistance | Excellent | Pres-On | |
| Shelf Life | 1 year stored at room temperature |
| Physical Properties | Property | Test Method | Result |
|---|---|---|---|
| Density (lbs/cu ft) | ASTM D-882 | 30 lbs | |
| Hardness, Shore A | ASTM D-2240 | 28 | |
| Tensile Strength (PSI) | ASTM D-882 | 175 | |
| 100% Modulus (PSI) | ASTM D-882 | 85 | |
| Elongation % | ASTM D-882 | 350 | |
| Thermal Conductivity | Retention of tensile properties 2 weeks @ 185 F and 100% R.H. | 80% Minimum |
- High density, open cell, urethane foam tape
- Coated with high tack acrylic adhesive on one side
- Uniform cell structure and excellent dimensional stability
- Resists moisture, dust, and contaminants
- Excellent compression set resistance
- Low thermal conductivity, retards heat flow
Pres-On U6000 Series Urethane Foam Tapes are ideal for gasketing and cushioning applications where good recovery is required.
- vibration / noise dampening
- electronic equipment components
- Door Gasketing
- Air Filters
- Thermal shielding
- HVAC units
Application Notes
Thoroughly clean contact surface before use. Once tape has been applied, it cannot be removed and reused. Therefore, position tape carefully, assuring that it is in contact with all surfaces. If tape is misaligned, remove used unit, discard and repeat application with new unit. Test product for system compatibility as individual application conditions can impact results.
- Release Liner: Brown Kraft Paper
LEGAL DISCLAIMER
IN NO EVENT WILL PRES-ON OR ANY OF ITS AFFILIATES BE LIABLE FOR ANY DIRECT OR INDIRECT DAMAGES, CLAIMS, OR LOSSES WHATSOEVER (INCLUDING, BUT NOT LIMITED TO, INCIDENTAL DAMAGES, CONSEQUENTIAL DAMAGES, LOST PROFITS AND/OR LOST OPPORTUNITIES) RESULTING FROM OR RELATED TO THIS PRODUCT OR THE USE, MISUSE, PURCHASE, OR SALE OF THIS PRODUCT, WHETHER BASED ON WARRANTY, CONTRACT, TORT, OR ANY OTHER LEGAL THEORY, WHETHER OR NOT FORESEEABLE, AND WHETHER OR NOT ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Any specifications, instructions, or other information provided by Pres-On in connection with this product are provided for informational purposes only and shall not be deemed to impose any representations, warranties, covenants or other obligations upon Pres-On or any of its affiliates.