U6500 Series Urethane Foam Tapes
Pres-On U6500 Series Urethane Foam Tapes are composed of medium density, open cell, urethane foam coated with high-tack acrylic adhesive on one side. These tapes provide an excellent bond to a wide range of fabrication materials including, paint, vinyl, plastic, bare metal, and glass. U6500 is also highly resistant to weather extremes, fungi, and oxidation.
Products Details
- Technical Specs
- Product Highlights
- Applications
- Available Options
| Standard Roll Size | Serial Number | Thickness | Length |
|---|---|---|---|
| Available in widths from 1/4" to 54" | U6503 | 1/32" | 200' |
| Adhesion Properties | Test | Typical Performance | Test Method |
|---|---|---|---|
| Single Coated Acrylic | Adhesion to Steel @ 72°F Steel immediate | 3.5 lbs/inch width or foam tear | PSTC-1 |
| Steel after 24 hours | 7.0 lbs/inch width or foam tear | PSTC-1 | |
| Polystyrene immediate | 5.0 lbs/inch width or foam tear | PSTC-1 | |
| Polystyrene after 24 hrs | 7.0 lbs/inch width or foam tear | PSTC-1 | |
| Powder paint immediate | 3.5 lbs/inch width or foam tear | PSTC-1 | |
| Powder paint after 24 hrs | 7.0 lbs/inch width or foam tear | PSTC-11 | |
| Static Shear @ 72°F 1 x 1 x 500 grams | Immediate | PSTC-7 | |
| Static Shear @ 72°F 1 x 1 x 1000 grams | 200 hours minimum | PSTC-7 | |
| UV Resistance | Excellent | Pres-On PTM-4 | |
| Optimal Application Temperature | 45°F to 80°F | Pres-On PTM-1 | |
| Service Temperature | -20°F to 200°F | Pres-On PTM-2 | |
| Water and Humidity Resistance | Excellent | Pres-On PTM-3 | |
| Shelf Life | 1 year stored at room temperature | -- |
| Physical Properties | Test Method | Unit of Measure | Result |
|---|---|---|---|
| Density | ASTM D3574 | lb/ft3 kg/m3 | 17-23 272-368 |
| Compression Deflection (25%) | ASTM D1056 | psi kPa | 30-50 207-345 |
| Tensile Strength (2) (Typical) | ASTM D3574 | psi kPa | 230 1585 |
| Elongation (2) (Typical) | ASTM D3574 | % | 140 |
| Tear Resistance | ASTM D624 | lb/in kN/m | 25 4.37 |
| Compression Set (1) | ASTM D1056 | % | 3 (max) |
| Color | -- | -- | Black |
| Service Temperature (Foam Only) | -- | -- | -40ºF to +250ºF |
| (1) Test performed at 73.4 +/- 3.6ºF, compressed 50% for 22 hours. 24 hour recovery. (2) Tested at .125" thickness, alternative thickness data upon request. |
- Medium density, open cell, urethane foam tapes
- Coated with high-tack, acrylic adhesive on one side
- Superior initial adhesion speeds on-site fabrication
- Long-term resistance to environmental damage
- Easy-to-use paper release liner
Pres-On U6500 Series Urethane Foam Tapes are ideal for gasketing and cushioning applications where good recovery is required.
- Vibration / noise dampening
- Electronic equipment components
- Door Gasketing
- Air Filters
- Thermal shielding
- HVAC units
Application Notes
Thoroughly clean contact surface before use. Once tape has been applied, it cannot be removed and reused. Therefore, position tape carefully, assuring that it is in contact with all surfaces. If tape is misaligned, remove used unit, discard and repeat application with new unit. Test product for system compatibility as individual application conditions can impact results.
- Release Liner: Brown Kraft Paper
- Custom die-cut shapes
LEGAL DISCLAIMER
IN NO EVENT WILL PRES-ON OR ANY OF ITS AFFILIATES BE LIABLE FOR ANY DIRECT OR INDIRECT DAMAGES, CLAIMS, OR LOSSES WHATSOEVER (INCLUDING, BUT NOT LIMITED TO, INCIDENTAL DAMAGES, CONSEQUENTIAL DAMAGES, LOST PROFITS AND/OR LOST OPPORTUNITIES) RESULTING FROM OR RELATED TO THIS PRODUCT OR THE USE, MISUSE, PURCHASE, OR SALE OF THIS PRODUCT, WHETHER BASED ON WARRANTY, CONTRACT, TORT, OR ANY OTHER LEGAL THEORY, WHETHER OR NOT FORESEEABLE, AND WHETHER OR NOT ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Any specifications, instructions, or other information provided by Pres-On in connection with this product are provided for informational purposes only and shall not be deemed to impose any representations, warranties, covenants or other obligations upon Pres-On or any of its affiliates.