Additional information
| Material Category | |
|---|---|
| Material | |
| Cell Structure | |
| Stock or Special Order | |
| Type of Tape | |
| Adhesive | |
| Thickness | |
| Produced as | |
| Roll Widths | |
| Softness | |
| Color | |
| Texture | |
| Durability | |
| Material Price | |
| Foam High Temperature Rating | |
| Foam Low Temperature Rating | |
| Outdoor | |
| UV Exposure | |
| Adhesive Temperature Range | |
| ASTM D1056 Classification | |
| ASTM D 1056-67 (outdated) | |
| Compression Deflection | |
| Durometer Shore | |
| Density | |
| Tensile Strength | |
| Compression Set | |
| Elongation | |
| Flammability | |
| Application | Air Filter, Clean Rooms, Construction, Data Center, Display, Doors, Electronics, Enclosures, HVAC, Marine, RVs, Trailer |
| Industry | |
| Reach / RoHS | |
| Made in: | |
| Test Methods: | |
| Disclaimer a: | Technical data presented above is the foam/material prior to the adheisve. |
| Disclaimer b: | End user is responsible for determining the suitability of the product to application. |
| Terms and Conditions |
Technical data
EPDM foam tape, closed cell, soft density, with a high-performance acrylic adhesive on one side.
- High-performance acrylic adhesive for a durable bond
- Closed cell foam
- Excellent temperature range
- Excellent resistance to UV, ozone, oxidation, acids, chemicals and weathering
| Classifications | ASTM D1056-07 2A1 · ASTM D1056-68 RE41 · ASTM D6576-07 Type II B, C Soft · GMW15473 Class I Type IV · WSK-M2D419-A Type 2 · TSM 1501G 2A1 | |
|---|---|---|
| ASTM D1056 suffix compliances | B, C1, F2, M | |
| Flammability | FMVSS-302 | |
| Color | Black | |
| Finish | Smooth | |
| Width | 40" (custom slit widths available) | |
| Thickness | 0.06", 0.12", 0.18", 0.25", 0.38", 0.50" | |
| Density | 7–11 pcf | ASTM D1056 |
| Compression deflection | 2–5 psi | ASTM D1056 |
| Compression set (max) | 25% | ASTM D1056 |
| Water absorption (max) | 5% | ASTM D1056 |
| Temperature range | Foam −70°F to +220°F; adhesive −20°F to +200°F | ASTM D1056 / Pres-On PTM-2 |
| Tensile strength | 55 psi | ASTM D412 |
| Elongation | 150% | ASTM D412 |
| Peel adhesion, steel | Immediate 3.5 lb/in width or foam tear; after 24 h 7.0 lb/in or foam tear | PSTC-1 |
|---|---|---|
| Peel adhesion, polystyrene | Immediate 5.0 lb/in; after 24 h 7.0 lb/in or foam tear | PSTC-1 |
| Peel adhesion, powder paint | Immediate 3.5 lb/in; after 24 h 3.5 lb/in or foam tear | PSTC-1 |
| Static shear @ 72°F, 1 × 1 in, 500 g | Immediate | PSTC-7 |
| Static shear @ 72°F, 1 × 1 in, 100 g | 200 hours minimum | PSTC-7 |
Source: P9300 data sheet (PDF). Values are typical unless stated. Color and finish may vary by lot; tolerances vary with thickness and width. Confirm suitability for your application with Pres-On.
