Additional information
| Material Category | |
|---|---|
| Material | |
| Cell Structure | |
| Stock or Special Order | |
| Type of Tape | |
| Adhesive | |
| Thickness | |
| Produced as | |
| Roll Widths | |
| Softness | |
| Color | |
| Texture | |
| Durability | |
| Material Price | |
| Foam High Temperature Rating | |
| Foam Low Temperature Rating | |
| Outdoor | |
| UV Exposure | |
| Adhesive Temperature Range | |
| ASTM D1056 Classification | |
| ASTM D 1056-67 (outdated) | |
| Compression Deflection | |
| Durometer Shore | |
| Density | |
| Tensile Strength | |
| Compression Set | |
| Elongation | |
| UL Rating | |
| Flammability | |
| NEMA Rating | NEMA 1, NEMA 2, NEMA 3, NEMA 3R, NEMA 3RX, NEMA 3S, NEMA 3SX, NEMA 3X, NEMA 4, NEMA 4X, NEMA 5, NEMA 6, NEMA 6P |
| R Value | |
| Additional Specs | ASTM D1149-91, ASTM D1171-94, CHRYSLER MSAY 527, GM4486P, GM6086M |
| Application | |
| Industry | Air Filter, Clean Rooms, Construction, Data Center, Display, Doors, Electronics, Enclosures, HVAC, Marine, RVs, Trailer |
| Reach / RoHS | |
| Made in: | |
| Test Methods: | |
| Disclaimer a: | Technical data presented above is the foam/material prior to the adheisve. |
| Disclaimer b: | End user is responsible for determining the suitability of the product to application. |
| Disclaimer c: | "Stock": Some sizes or adhesive options might be special order. |
| Terms and Conditions |
Technical data
Blended neoprene / EPDM / SBR closed cell foam tape, soft density (2C1), with a high-performance rubber pressure-sensitive adhesive on one side.
- All-purpose durable closed cell foam with a high-bond adhesive
- Absorbs shock, dampens sound and vibration
- Available as tape rolls, die-cut shapes, sheets, long-length spools and master log rolls
| Hardness | Soft | |
|---|---|---|
| Color | Black | |
| Cell type | Closed cell foam | |
| ASTM D1056 classification | 2C1 (SCE-41) | |
| ASTM D1056 suffix compliances | A1, B2, B3, C1, C2, F1, M | |
| ASTM D6576 classification | Type II A, B Soft | |
| Density | 6 pcf (±2) | ASTM D1056 |
| Pressure to compress 25% | 2–5 psi | ASTM D1056 |
| Compression set, 50% | 25% max | ASTM D1056 |
| Compression deflection after oven aging | 30% max | ASTM D1056 |
| Water absorption | 5% max | ASTM D1056 |
| Oil resistance | Medium mass change | |
| Tensile strength | 75 psi min | ASTM D412 |
| Elongation | 150% min | ASTM D412 |
| Thermal conductivity | K factor .27 | ASTM C518 |
| Temperature range | −40°F to 250°F | ASTM D1056 |
| Flammability | Pass | FMVSS-302 |
| UL flammability | UL 94 HF-1 | |
| UL gasket and sealing | UL50E, UL508, UL157 |
| Standard adhesive | Rubber, high tack, permanent | |
|---|---|---|
| Indoor rating | Excellent | |
| Outdoor rating | Good | |
| Functional temperature | 0–140°F | |
| Shelf life | 1 year |
| Thickness (series code) | 1/16" P8206 · 1/8" P8212 · 3/16" P8218 · 1/4" P8225 · 5/16" P8231 · 3/8" P8238 · 1/2" P8250 · 5/8" P8263 · 3/4" P8275 · 1" P821 | |
|---|---|---|
| Width | Any roll width up to full 50"; logs 54" (approx. 50–52" usable) | |
| Length | Standard roll and custom lengths; continuous-length spooling available | |
| Sheets | Any size up to 50" wide | |
| Die cuts | Kiss-cut, kits, separate pieces, to drawing |
Source: P8200 data sheet (PDF), revision 08.02.2022. Values are typical unless stated. Color and finish may vary by lot; tolerances vary with thickness and width. Confirm suitability for your application with Pres-On.
