Additional information
| Material Category | |
|---|---|
| Material | |
| Cell Structure | |
| Stock or Special Order | |
| Type of Tape | |
| Adhesive | |
| Thickness | |
| Produced as | |
| Roll Widths | |
| Softness | |
| Color | |
| Texture | |
| Durability | |
| Material Price | |
| Foam High Temperature Rating | |
| Foam Low Temperature Rating | |
| Outdoor | |
| UV Exposure | |
| Adhesive Temperature Range | |
| ASTM D1056 Classification | |
| ASTM D 1056-67 (outdated) | |
| Compression Deflection | |
| Durometer Shore | |
| Density | |
| Tensile Strength | |
| Compression Set | |
| Elongation | |
| UL Rating | Yes, UL 94 HF-1, UL 508, UL 50E, UL 157 |
| Flammability | |
| NEMA Rating | NEMA 1, NEMA 2, NEMA 3, NEMA 3R, NEMA 3RX, NEMA 3S, NEMA 3SX, NEMA 3X, NEMA 4, NEMA 4X, NEMA 5, NEMA 6, NEMA 6P |
| R Value | |
| Additional Specs | ASTM D1149-91, ASTM D1171-94, CHRYSLER MSAY 527, GM4486P, GM6086M, NEMA 4X |
| Reach / RoHS | |
| Made in: | |
| Test Methods: | |
| Disclaimer a: | Technical data presented above is the foam/material prior to the adheisve. |
| Disclaimer b: | End user is responsible for determining the suitability of the product to application. |
| Terms and Conditions |
Technical data
P8100 (SC 42-UL): specification-grade black closed cell neoprene / EPDM / SBR blend tape, medium density, UL listed, with a high-tack rubber-based pressure-sensitive adhesive on one side.
- Absorbs shock and dampens sound and vibration
- Provides a tight, long-lasting seal against moisture, dust and air leaks
- Passes FMVSS 302 and UL 94 HF1 for flammability
- Resists acids, alkali, ozone and oxidation
Markets: Gasketing and weatherproofing windows and doors
| Density | 4–8 pcf (.064–.128 kg/cm³) | ASTM D1056 |
|---|---|---|
| ASTM D1056-67 grade | SCE 42 | |
| ASTM D1056-07 | 2C2 | |
| Service temperature | −40°F to +250°F | |
| Water absorption (max) | 5% | ASTM D1056 |
| Tensile strength (min) | 75 psi (517 kPa) | ASTM D412 (Die A) |
| Elongation (min) | 150% | ASTM D412 (Die A) |
| Compression deflection 25% | 5–9 psi | ASTM D1056 |
| Compression set (max) | 25% | ASTM D1056 |
| Durometer | 30–50 Shore 00 | ASTM D1056 |
| Flammability | Pass | UL 94 HF1, FMVSS 302 (UL E208679) |
| UL 50, UL 50E, UL 157, UL 508 | Pass | UL JMLU2, MH10200 |
| Adhesive | High-tack rubber-based pressure-sensitive adhesive, one side, with release liner (acrylic PSA available; minimums may apply) | |
|---|---|---|
| Adhesion to steel @ 72°F | Immediate 7 lb/in width or foam tear; after 24 h 8 lb/in or foam tear | PSTC-1 |
| Adhesion to steel, 20 minute dwell | 10 lb/in width minimum | PSTC-1 |
| Static shear @ 72°F, 1 × 1 in | 500 g: 1000 hours minimum; 1000 g: 200 hours minimum | PSTC-7 |
| Shelf life | 1 year stored at room temperature |
| Standard rolls (serial number, thickness, length) | P8106 1/16" 50′ · P8112 1/8" 50′ · P8118 3/16" 50′ · P8125 1/4" 50′ · P8137 3/8" 25′ · P8150 1/2" 25′ · P8175 3/4" 25′ · P811 1" 25′ (all SC 42-UL) | |
|---|---|---|
| Width | 1/4" to 54" |
Source: P8100UL data sheet (PDF). Values are typical unless stated. Color and finish may vary by lot; tolerances vary with thickness and width. Confirm suitability for your application with Pres-On.
