Additional information
| Material Category | |
|---|---|
| Material | |
| Stock or Special Order | |
| Type of Tape | |
| Adhesive | |
| Produced as | |
| Roll Widths | |
| Reach / RoHS | |
| Made in: | |
| Test Methods: | |
| Disclaimer a: | Technical data presented above is the foam/material prior to the adheisve. |
| Disclaimer b: | End user is responsible for determining the suitability of the product to application. |
| Terms and Conditions |
Technical data
PHB5100G gray double-sided acrylic high bond tape for high and medium surface energy substrates: absorbs differing thermal expansion, keeps high impact resistance below 0°C, very high initial tack and plasticizer resistance.
- Excellent weathering properties including moisture and sub-zero temperatures
- Resistant to high temperatures for bonding before paint processing
- Continuous bond distributes stress over the entire surface; faster, easier assembly
- Dampens noise and vibration
- Compensates for differential thermal expansion or contraction; conforms to thin or textured surfaces
Markets: High and medium surface energy plastics · Glass · Steel · Aluminum · Ceramics
| PHB5115G .015" | PHB5125G .025" | PHB5130G .030" | PHB5145G .045" | PHB5160G .060" | Test / note | |
|---|---|---|---|---|---|---|
| Density, kg/m³ (lb/ft³) | 840 (52) | 900 (56) | 900 (56) | 900 (56) | 900 (56) | |
| 90° peel adhesion, N/10 mm (lb/in) | 32 (18) | 34 (19) | 38 (21) | 41 (23) | 41 (23) | ASTM D3330 |
| Dynamic shear strength, kPa (lb/in²) | 700 (101) | 670 (96) | 650 (93) | 590 (85) | 540 (78) | ASTM D1002 |
| Normal tensile, kPa (lb/in²) | 670 (97) | 690 (100) | 650 (93) | 590 (85) | 540 (78) | ASTM D897 |
| Standard roll length | 108′ | 108′ | 108′ | 108′ | 54′ |
| Tape color | Gray | |
|---|---|---|
| Static shear strength (weight held by 1/2 in² for 10,000 min) | 1000 g at 72°F; 500 g at 150°F; 500 g at 200°F | ASTM D3654 |
| Temperature resistance | −40°F to 212°F | |
| Recommended application temperature | 50°F to 100°F | |
| Solvent resistance | Excellent | |
| UV resistance | Excellent | |
| Shelf life | 1 year | |
| Note | Not intended for heavily plasticized materials or very low surface energy plastics such as polyethylene and polypropylene |
| Widths | 3/16" to 35" |
|---|
Source: PHB5100 data sheet (PDF). Values are typical unless stated. Color and finish may vary by lot; tolerances vary with thickness and width. Confirm suitability for your application with Pres-On.
