Additional information
| Material Category | |
|---|---|
| Material | |
| Cell Structure | |
| Stock or Special Order | |
| Type of Tape | |
| Adhesive | |
| Thickness | |
| Produced as | |
| Roll Widths | |
| Softness | |
| Color | |
| Texture | |
| Durability | |
| Material Price | |
| Foam High Temperature Rating | |
| Foam Low Temperature Rating | |
| Outdoor | |
| Adhesive Temperature Range | |
| Compression Deflection | |
| Durometer Shore | |
| Density | |
| Tensile Strength | |
| Elongation | |
| Flammability | |
| Chemical Resistance | |
| Reach / RoHS | |
| Made in: | |
| Test Methods: | |
| Disclaimer a: | Technical data presented above is the foam/material prior to the adheisve. |
| Disclaimer b: | End user is responsible for determining the suitability of the product to application. |
| Terms and Conditions |
Technical data
Pres-Bond™ closed cell medium-density gray vinyl foam tape with a one-sided acrylic PSA: resists water and other fluids and gives a long-life seal against light, dust and air.
- Closed cell medium-density PVC foam resists water and other fluids
- Maintains a permanent positive seal as gasketing
- Combines strength with flexibility; conforms to irregular, curved and uneven surfaces
- Cushions and absorbs shock; used in sound, electrical and thermal applications
- Aggressive, long-life acrylic adhesive on one side
Markets: HVAC · Transportation · Retail · Marine · Appliance · Construction · Automobile
| Density | 13 lb/ft³ | ASTM D1667 |
|---|---|---|
| Hardness | 35 Shore 00 | ASTM D2240 |
| Compression deflection (30%) | 10 psi | ASTM D1667 |
| Compression set @ 100 psi (% lost at 30% compression) | 8% | ASTM D1667 |
| Water absorption | 22% by volume | |
| Recommended service temperature | −20°F to +170°F | |
| Color | Gray |
| Adhesion to steel @ 72°F | Immediate 3.5 lb/in width or foam tear; after 24 h 7.0 lb/in or foam tear | PSTC-1 |
|---|---|---|
| Adhesion to polystyrene | Immediate 5.0 lb/in; after 24 h 7.0 lb/in or foam tear | PSTC-1 |
| Adhesion to powder paint | Immediate 3.5 lb/in; after 24 h 7.0 lb/in or foam tear | PSTC-1 |
| Shear @ 72°F, 1" × 1" | 500 g: indefinite; 1000 g: 200 hours minimum | PSTC-7 |
| UV resistance | Excellent | Pres-On PTM-4 |
| Optimal application temperature | 45°F to 80°F | Pres-On PTM-1 |
| Service temperature | −20°F to 200°F | Pres-On PTM-2 |
| Water and humidity resistance | Excellent | Pres-On PTM-3 |
| Shelf life | 1 year stored at room temperature |
| Standard rolls (serial number, thickness, length) | VF1112 1/8" 75′ · VF1118 3/16" 45′ · VF1125 1/4" 45′ | |
|---|---|---|
| Width | Standard 52"; custom widths available |
Source: VF1100 data sheet (PDF). Values are typical unless stated. Color and finish may vary by lot; tolerances vary with thickness and width. Confirm suitability for your application with Pres-On.
