Additional information
| Material Category | |
|---|---|
| Material | |
| Cell Structure | |
| Stock or Special Order | |
| Type of Tape | |
| Thickness | |
| Produced as | |
| Roll Widths | |
| Softness | |
| Color | |
| Texture | |
| Durability | |
| Material Price | |
| Foam High Temperature Rating | |
| Foam Low Temperature Rating | |
| ASTM D1056 Classification | |
| Compression Deflection | |
| Durometer Shore | |
| Density | |
| Tensile Strength | |
| Elongation | |
| Flammability | |
| Application | |
| Industry | |
| Reach / RoHS | |
| Made in: | |
| Test Methods: | |
| Disclaimer a: | Technical data presented above is the foam/material prior to the adheisve. |
| Disclaimer b: | End user is responsible for determining the suitability of the product to application. |
| Terms and Conditions |
Technical data
Semi-closed cell crushed EPDM / EPT sealer: combines the flexibility of open cell foam with the sealing qualities of closed cell foam; extremely soft, lightweight and compressible, with or without acrylic / rubber adhesive.
- Soft lightweight foam gasket seals out dust, wind, water and noise
- Superior resistance to aging, chemicals and weather (cold and heat)
- Excellent joint and space filler; minimizes or eliminates vibration
- Meets automotive specifications MS-AY550 and Toyota TSK 6505G-2A1
Markets: Weather stripping · HVAC sealing · Water-proofing · Thermal insulation · Air sealing · Gasketing · Mounting · Vibration isolation
| Grade | 1A0 | ASTM D1056-00 |
|---|---|---|
| Density | 4–8 pcf | ASTM D1056 |
| 25% compression force deflection | 1 psi max | ASTM D1056 |
| 50% compression force deflection | 0.3–1.4 psi | ASTM D1056 |
| 50% compression set | 10% max | ASTM D1056 |
| Tensile strength | 20 psi min | ASTM D412 |
| Elongation | 200% | ASTM D412 |
| Tear resistance | 4 ppi min | ASTM D624 |
| Flame resistance | FMVSS 302 pass; UL 50 pass; UL 94 HBF-1 @ 0.3 cm recognized | |
| Service temperature | −67°F to 250°F |
| Standard rolls (serial number, thickness, length) | P9406 1/16" 100′ · P9412 1/8" 50′ · P9418 3/16" 50′ · P9425 1/4" 50′ | |
|---|---|---|
| Widths | 3/16" to 54" | |
| Adhesive | Available with or without acrylic / rubber PSA |
Source: P9400 data sheet (PDF). Values are typical unless stated. Color and finish may vary by lot; tolerances vary with thickness and width. Confirm suitability for your application with Pres-On.
