P9400 Series Crushed EPDM Tape
P9400 Series Crushed EPDM Tape combine the flexibility of open cell foam with the outstanding sealing qualities of closed cell foam. They are extremely soft, lightweight and compressible which makes them ideal for filling joints and spaces. P9400 can be specified with or without an Acrylic or Rubber adhesive. Meets several automotive specifications including MS-AY550 &TSK6505G-2A.
Products Details
- Technical Specs
- Product Highlights
- Applications
- Available Options
Standard Roll Sizes | Serial Number | Thinkness (Inch) | Length (Feet) |
---|---|---|---|
All rolls available in widths from 3/16” to 54” | P9406 | 1/16 | 100 |
P9412 | 1/8 | 50 | |
P9418 | 3/16 | 50 | |
P9425 | 1/4 | 50 |
Physical Properties | Property | Specification | Test Method |
---|---|---|---|
Composition is EPDM | Grade | 1A0 | ASTM D 1056-00 |
Density (pcf) | 4-8 | ASTM D 1056 | |
25% CFD (psi) | 1 max | ASTM D 1056 | |
50 CFD (psi) | 0.3 - 1.4 | ASTM D 1056 | |
50% Compression Set (%) | ) 10 max | ASTM D 1056 | |
Tensile Strength (psi) | 20 min | ASTM D 412 | |
Elongation (% | 200 | ASTM D 412 | |
Tear Resistance (ppi) | 4 min | ASTM D 624 | |
Flame Resistance | Pass | FMVSS 302 | |
- | Pass | UL 50 | |
- | HBF-1 @ 0.3 cm | UL 94 Recognized | |
Upper Service Temp (°F) | 250 | -- | |
Lower Service Temp (°F) | -67 | -- |
- Ideal for die-cutting into soft, lightweight foam gaskets
- Seal out dust, wind, water, and noise
- Superior resistance to aging, chemicals, and weather (cold/heat)
- Excellent as joint/space filling material
- Minimize or eliminate vibration
- Available with or without acrylic/rubber PSA
- Complies with Toyota TSK 6505G-2A1, Plastic Substrates
- Weather stripping
- Water-proofing
- Thermal Shielding
- Air Filters
- Vibration / Noise Dampening
- Joint Filling / Sealing
Application Notes
Thoroughly clean contact surface before use. Once tape has been applied, it cannot be removed and reused. Therefore, position tape carefully, assuring that it is in contact with all surfaces. If tape is misaligned, remove used unit, discard and repeat application with new unit. Test product for system compatibility as individual application conditions can impact results.
- Release Liner: Brown Kraft Paper
- Also available with acrylic adhesive coating (minimums apply)
- Custom die-cut shapes
LEGAL DISCLAIMER
IN NO EVENT WILL PRES-ON OR ANY OF ITS AFFILIATES BE LIABLE FOR ANY DIRECT OR INDIRECT DAMAGES, CLAIMS, OR LOSSES WHATSOEVER (INCLUDING, BUT NOT LIMITED TO, INCIDENTAL DAMAGES, CONSEQUENTIAL DAMAGES, LOST PROFITS AND/OR LOST OPPORTUNITIES) RESULTING FROM OR RELATED TO THIS PRODUCT OR THE USE, MISUSE, PURCHASE, OR SALE OF THIS PRODUCT, WHETHER BASED ON WARRANTY, CONTRACT, TORT, OR ANY OTHER LEGAL THEORY, WHETHER OR NOT FORESEEABLE, AND WHETHER OR NOT ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Any specifications, instructions, or other information provided by Pres-On in connection with this product are provided for informational purposes only and shall not be deemed to impose any representations, warranties, covenants or other obligations upon Pres-On or any of its affiliates.